홈페이지> 블로그> How to use a roll forming machine?--YuFa roll forming

How to use a roll forming machine?--YuFa roll forming

September 25, 2019
1.Put on your safety glasses.

2.Place the socket that matches the guard bolts onto the 3/8-inch drive ratchet and loosen the nuts that hold the guard onto the top of the roll-forming machine.

3.Lift the guard up to remove it from the top of the roll former.

4.Blow out the area between the rolls with the air hose to remove metal shavings and other debris from the series of rolls, and spray the rolls with tool oil to add lubrication and prevent corrosion from forming on the face of the rolls.

5.Slide the guard back over the studs and tighten the nuts with the ratchet to secure the guard to the roll-forming machine.

6.Inspect the installed guard to ensure that no part of the guard falls into the feed area of the roll-forming machine and that the starting guide located on the feeder bed, in front of the guard, is not damaged.

7.Turn on the roll-forming machine by depressing the green start button.

8.Rest the side of the metal that is going to be roll formed against the starting guide and slide the metal toward the guide.

9.Support the metal sheet as it is grabbed by the roll-forming machine, works its way down through the series of rolls and is ejected from the far side of the roll-forming machine.

10.Inspect the finished rolled edge to ensure that the clearances are correct. If you notice that the seam is malformed or jammed tight, adjust the rolls according to the operating manual and run another piece of sheet metal through the roll-forming machine.

2

문의하기

Author:

Mr. Yang

이메일:

664270928@qq.com

Phone/WhatsApp:

+86 15869346648

인기 상품
전시 뉴스
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
휴대전화:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

  • 질문 보내기
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신