홈페이지> 블로그> CNC cutter cutter and straight knife use instructions

CNC cutter cutter and straight knife use instructions

September 27, 2022

With the development of modern machinery processing industry, the requirements for the quality and precision of cutting have been continuously improved, and the requirements for improving production efficiency, reducing production costs, and having high-efficiency automatic cutting functions are also increasing. As a part of the cutting machine industry, the products we provide will be the most modern and technological. Welcome everyone to discuss cooperation. Details:/
CNC cutting machine information cutting machining is one of the most widely used processing technologies for modern manufacturing tools. According to statistics, the proportion of foreign cutting processing in the entire manufacturing process is about 80% to 85%, while in the domestic this ratio is as high as 90%. The cutting tool is an indispensable tool in the cutting process. Whether it is an ordinary machine tool, an advanced CNC machine tool (NC), a machining center (MC), or a flexible manufacturing system (FMC), all must rely on tools to complete the cutting process.
CNC milling cutter W1: Width of the front end of the tool, commonly used shank diameter ∮ 3.175, ∮ 4, ∮ 6; If the cutting material thickness is less than 10MM small words, when using ∮ 3.175 knife cutting words to be deformed, sometimes Use a variable-handle tool that changes the tool shank diameter from ∮3.175 to 前端2 or ∮1.5.
H1: The length of the blade, the thickness of the cutting material should be less than the length of the blade, generally H1 is divided into the following types according to the thickness of the material (2mm more than the cutting material, to facilitate chip removal).
12mm: cut 10MM and the following materials 17mm: cut 15MM material 22mm: cut 20MM material (PVC multi-purpose 3.175; acrylic with ∮ 4)
Engraveable materials: PVC board, organic glass, wood board, etc.
Cutable materials: PVC board, plexiglass, wood board, etc.
The principle of the knife used in CNC cutting machine: It is not recommended to use 22mm cutting tools to cut 10MM and below materials, which may cause cutting of the knife; when there is no 22mm cutting tool, but also to cut 20MM material, you can use temporary 17mm cutting tools to achieve through layered cutting.
CNC cutting machine single edge double-edged straight knife (pillar knife)
W1: The width of the front edge of the cutter blade, the common width is 2mm, 1.5mm, slightly smaller in general setting, because the front end of the cutter blade is convenient for chip removal, and one edge is repaired, so the actual width is slightly smaller.
H1: The length of the cutting edge of the cutter, the height of the cutting material should be less than the length of the cutting edge, generally H1 is set to about 5mm.
Engraveable materials: two-color board, PVC board, organic glass, ABS board, etc.
Cutable material: two-color board, ABS board.
Therefore, many kinds of tools are used for large-size engraving on the department card, so it is also called the department licensing knife, but the engraving effect is slightly inferior to the flat knife with the same width. The edge of the material it cuts is a straight edge, while the edge of the material cut by a flat-bottomed knife has a hypotenuse. The degree of tilt depends on the angle of the tool. The angle is large, and the slope of the edge is larger.
【China Cutter Trading Network is now giving back to the old and new members, special advertising space for free experience activities, a golden opportunity, first come first served. Log on to the official website for the latest information:/
Editor: zgqgjjyw

문의하기

Author:

Mr. Yang

이메일:

664270928@qq.com

Phone/WhatsApp:

+86 15869346648

인기 상품
전시 뉴스
You may also like
Related Categories

이 업체에게 이메일로 보내기

제목:
휴대전화:
이메일:
메시지:

Your message must be betwwen 20-8000 characters

  • 질문 보내기
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신